square lcd screen raspberry pi brands

Inky wHAT is a 400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi, a larger version of our popular Inky pHAT display, with more than 5x the number of pixels, and available in three colour schemes - red/black/white,...

Build a full-featured media center capable of playing nearly all of your digital media using any 40 pin Raspberry Pi and the Media Center HAT Raspberry Pi touchscreen display. Native support in...

Inky wHAT is a 400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi, a larger version of our popular Inky pHAT display, with more than 5x the number of pixels - red/black/white version.

If you"re looking for the most compact li"l color display for a Raspberry Pi B+, Pi 2, & Pi 3 (most likely a Pi Zero) project, this might be just the thing you need!

In honour of Raspberry Pi"s 10th birthday, we"ve fused a RP2040 microcontroller with an EPD display to make a stylishly monochrome, maker friendly, e-paper badge(r)...

Pico Inky Pack features the speedy 2.9" e-paper display that you can find on Badger 2040, coupled with three handy buttons for interfacing. Equip it to the back of your...

Waveshare 21435 - 2.8″ Touch Screen Expansion For Raspberry Pi Compute Module 4, Fully Laminated Display, Gigabit Ethernet, USB2.0, Optional Interface Expander

In honour of Raspberry Pi"s 10th birthday, we"ve fused a RP2040 microcontroller with an EPD display to make a stylishly monochrome, maker friendly,...

Crisp, high-res, with great viewing angles (IPS), this 1.3" square, 240x240 pixel, colour LCD will add some pizzazz to your Raspberry Pi or Arduino projects.

HyperPixel 4.0 Square has all the great features of our standard HyperPixel 4.0—a crisp, brilliant IPS display, optional touchscreen, and high-speed DPI interface—it"s just more square!

This square version of HyperPixel 4.0 is great for custom interfaces and control panels, and works really well for Pico-8 games. Everything is pre-soldered and ready to go, just pop it onto your Pi, run our installer, and away you go!

HyperPixel 4.0 Square uses a high-speed DPI interface, allowing it to shift 5x more pixel data than the usual SPI interface that these small Pi displays normally use. It has a 60 FPS frame rate and a resolution of approximately 254 pixels per inch (720x720px) on its 4.0" display. The display can show 18-bits of colour (262,144 colours).

The touchscreen variant is capacitive touch, that"s more sensitive and responsive to touch than a resistive touch display, and it"s capable of multi-touch!

Please note: when installing HyperPixel 4.0 Square onto your Pi make sure not to press down on the screen surface! Hold the board by its edges and wiggle it to mate with the extended header (or GPIO header). Also take care not to pull on the edges of the glass display when removing your HyperPixel.

It"ll work with any 40-pin version of the Pi, including Pi Zero and Pi Zero W. If you"re using it with a larger Pi then use the extra 40-pin header that"s included to boost it up to the required height. If you"re using a Pi Zero or Pi Zero W then just pop it straight onto the GPIO.

The included standoff kit allows you to mount your HyperPixel 4.0 Square safely and securely to your Pi. Just screw them into the posts on the underside of the HyperPixel 4.0 Square PCB and then secure with screws through the mounting holes on your Pi.

We"ve put together a one-line-installer to configure your Pi properly for HyperPixel 4.0 Square and to enable the touchscreen. Note that you"ll need another display, keyboard, and mouse to install the software, or you could do it remotely over SSH if you follow our guide on how to set your Pi up headlessly.

The HyperPixel 4.0 Square Touch in the main photo here is on its side, and that the slightly narrower and slightly wider bezels are usually at the bottom and top respectively, although there"s very little difference in size (5.5mm for the left and right sides, 4.5 for the top, and 6.5mm for the bottom). The Non-touch is also on its side, so the wider bezel is usually at the bottom, although because the display is square you can use it any way round!

The official Raspberry Pi 7” Touchscreen allows you to add touch inputs to your programs, creating a new way to interact with your projects. It also makes for a fantastic desktop screen for day-to-day use of your Raspberry Pi. Wrap it in one of our screen cases and take it anywhere – events, Raspberry Jams or even just your friends house for a coding evening!

For smaller projects, LCD and ePaper displays are a fun way to add a visual element to your projects. With simple code and wiring, they’re great for projects that require text, menus and navigation.

-Select-AfghanistanAlbaniaAlgeriaAmerican SamoaAndorraAngolaAnguillaAntigua and BarbudaArgentinaArmeniaArubaAustraliaAustriaAzerbaijan RepublicBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBrazilBritish Virgin IslandsBrunei DarussalamBulgariaBurkina FasoBurundiCambodiaCameroonCanadaCape Verde IslandsCayman IslandsCentral African RepublicChadChileChinaColombiaComorosCongo, Democratic Republic of theCongo, Republic of theCook IslandsCosta RicaCroatia, Republic ofCyprusCzech RepublicCôte d"Ivoire (Ivory Coast)DenmarkDjiboutiDominicaDominican RepublicEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEthiopiaFalkland Islands (Islas Malvinas)FijiFinlandFrench GuianaFrench PolynesiaGabon RepublicGambiaGeorgiaGermanyGhanaGibraltarGreeceGreenlandGrenadaGuadeloupeGuamGuatemalaGuernseyGuineaGuinea-BissauGuyanaHaitiHondurasHong KongHungaryIcelandIndonesiaIraqIrelandIsraelItalyJamaicaJapanJerseyJordanKazakhstanKenyaKiribatiKorea, SouthKuwaitKyrgyzstanLatviaLebanonLesothoLiberiaLibyaLiechtensteinLithuaniaLuxembourgMacauMacedoniaMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMartiniqueMauritaniaMauritiusMayotteMexicoMicronesiaMoldovaMonacoMongoliaMontenegroMontserratMoroccoMozambiqueNamibiaNauruNepalNetherlandsNetherlands AntillesNew CaledoniaNew ZealandNicaraguaNigerNigeriaNiueNorwayOmanPakistanPalauPanamaPapua New GuineaParaguayPeruPhilippinesPolandPortugalPuerto RicoQatarReunionRomaniaSaint HelenaSaint Kitts-NevisSaint LuciaSaint Pierre and MiquelonSaint Vincent and the GrenadinesSan MarinoSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSlovakiaSloveniaSolomon IslandsSomaliaSouth AfricaSpainSurinameSwazilandSwedenSwitzerlandTaiwanTajikistanTanzaniaThailandTogoTongaTrinidad and TobagoTunisiaTurkmenistanTurks and Caicos IslandsTuvaluUgandaUnited Arab EmiratesUnited KingdomUnited StatesUruguayUzbekistanVanuatuVatican City StateVenezuelaVietnamVirgin Islands (U.S.)Wallis and FutunaWestern SaharaWestern SamoaYemenZambia

The HyperPixel 4.0 Square has all the great features of the standard HyperPixel 4.0—a crisp, brilliant IPS display, touchscreen, and high-speed DPI interface—it"s just more square!

This square version of HyperPixel 4.0 is great for custom interfaces and control panels and works really well for Pico-8 games. Everything is pre-soldered and ready to go, just pop it onto your Pi, run the installer, and away you go!

When installing HyperPixel 4.0 Square onto your Pi make sure not to press down on the screen surface! Hold the board by its edges and wiggle it to mate with the extended header (or GPIO header).

It"ll work with any 40-pin version of the Pi, including Pi Zero and Pi Zero W. If you"re using it with a larger Pi then use the extra 40-pin header that"s included to boost it up to the required height. If you"re using a Pi Zero or Pi Zero W then just pop it straight onto the GPIO.

The included standoff kit allows you to mount your HyperPixel 4.0 Square safely and securely to your Pi. Just screw them into the posts on the underside of the HyperPixel 4.0 Square PCB and then secure them with screws through the mounting holes on your Pi.

HyperPixel 4.0 Square has all the great features of our standard HyperPixel 4.0—a crisp, brilliant IPS display, optional touchscreen, and high-speed DPI interface—it"s just more square!

This square version of HyperPixel 4.0 is great for custom interfaces and control panels, and works really well for Pico-8 games. Everything is pre-soldered and ready to go, just pop it onto your Pi, run our installer, and away you go!

Note that the images of the displays on this page have not been Photoshopped. That"s the Raspberry Pi OS desktop with our HyperPixel Square wallpaper on!

HyperPixel 4.0 Square uses a high-speed DPI interface, allowing it to shift 5x more pixel data than the usual SPI interface that these small Pi displays normally use. It has a 60 FPS frame rate and a resolution of approximately 254 pixels per inch (720x720px) on its 4.0" display. The display can show 18-bits of colour (262,144 colours).

The touchscreen variant is capacitive touch, that"s more sensitive and responsive to touch than a resistive touch display, and it"s capable of multi-touch!

Please note: when installing HyperPixel 4.0 Square onto your Pi make sure not to press down on the screen surface! Hold the board by its edges and wiggle it to mate with the extended header (or GPIO header). Also take care not to pull on the edges of the glass display when removing your HyperPixel.

It"ll work with any 40-pin version of the Pi, including Pi Zero and Pi Zero W. If you"re using it with a larger Pi then use the extra 40-pin header that"s included to boost it up to the required height. If you"re using a Pi Zero or Pi Zero W then just pop it straight onto the GPIO.

The included standoff kit allows you to mount your HyperPixel 4.0 Square safely and securely to your Pi. Just screw them into the posts on the underside of the HyperPixel 4.0 Square PCB and then secure with screws through the mounting holes on your Pi.

Raspberry Pi OS Bullseye includes major changes to how DPI display drivers work. If you"re using an image dated 04/04/2022 or later, it will come with Hyperpixel drivers baked in and you don"t need to run the installer. You can set up display and touch by adding a few lines to your boot/config.txt:

⚠ Note that touch rotation commands are not currently working with the kernel drivers for square, and that these drivers will only work with newer square boards (marked Hyperpixel XP).

If you"re usingRaspberry Pi OS Buster/Legacy(or an earlier version), you can use our one-line-installer to configure your Pi properly for HyperPixel 4.0 and to enable the touch screen on the touch version. Note that you"ll need another display, keyboard, and mouse to install the software, or you could do it remotely over SSH if you follow our guide on how to set your Pi up headlessly.

The HyperPixel 4.0 Square Touch in the main photo here is on its side, and that the slightly narrower and slightly wider bezels are usually at the bottom and top respectively, although there"s very little difference in size (5.5mm for the left and right sides, 4.5 for the top, and 6.5mm for the bottom). The Non-touch is also on its side, so the wider bezel is usually at the bottom, although because the display is square you can use it any way round!

HyperPixel uses basically all of the GPIO pins to communicate with the Pi (including the standard I2C pins) so it"s not generally possible to use it with other HATs and devices that connect via the GPIO...

...but we have provided an alternate I2C interface broken out on the back that will let you use I2C devices (like sensor breakouts) at the same time as HyperPixel. There are instructions how to set this up in our Hyperpixel 4.0 tutorial (scroll down to the bottom).

HyperPixel 4.0 Square has all the great features of our standard HyperPixel 4.0—a crisp, brilliant IPS display, optional touchscreen, and high-speed DPI interface—it"s just more square!

This square version of HyperPixel 4.0 is great for custom interfaces and control panels, and works really well for Pico-8 games. Everything is pre-soldered and ready to go, just pop it onto your Pi, run our installer, and away you go!

HyperPixel 4.0 Square uses a high-speed DPI interface, allowing it to shift 5x more pixel data than the usual SPI interface that these small Pi displays normally use. It has a 60 FPS frame rate and a resolution of approximately 254 pixels per inch (720x720px) on its 4.0" display. The display can show 18-bits of colour (262,144 colours).

The touchscreen variant is capacitive touch, that"s more sensitive and responsive to touch than a resistive touch display, and it"s capable of multi-touch!

Please note: when installing HyperPixel 4.0 Square onto your Pi make sure not to press down on the screen surface! Hold the board by its edges and wiggle it to mate with the extended header (or GPIO header). Also take care not to pull on the edges of the glass display when removing your HyperPixel.

It"ll work with any 40-pin version of the Pi, including Pi Zero and Pi Zero W. If you"re using it with a larger Pi then use the extra 40-pin header that"s included to boost it up to the required height. If you"re using a Pi Zero or Pi Zero W then just pop it straight onto the GPIO.

The included standoff kit allows you to mount your HyperPixel 4.0 Square safely and securely to your Pi. Just screw them into the posts on the underside of the HyperPixel 4.0 Square PCB and then secure with screws through the mounting holes on your Pi.

Raspberry Pi boards have revolutionized the electronics hobby world with their simple credit card-sized DIY computer kits. Today, almost anyone with a basic electronics assembly and coding knowledge could set up a Raspberry Pi system of their own.

In order to create a small computer of your own, all you need to have is a raspberry pi board, a display unit and a keyboard (optional). If you are able to find the perfect touch screen, you can create a great DIY computer of your own.

Today, we are going to list down all of the best Raspberry Pi compatible LCD screens available online. These screens are ranked and rated based on the following factors.

Rule of thumb, larger the better. The best of the LCD screens for a Raspberry Pi we got here have a 1080P high resolution and is a full touch screen. There are higher variants available as well but we believe that this is a standard benchmark.

The next important thing that you need to look for in a screen is its compatibility with the various systems that you may be using it other than the Raspberry Pi.

This refers to the ports and other connectivity options through which you can set up the screen to the board. It includes the standard HDMI pots to USB ports and even WiFi compatibility as well. Higher the number of I/O ports, the better

First on our list is an LCD touch screen straight from the official house of Raspberry Pi. It is a 7 inches large touch display that is specifically created for the Raspberry Pi board.

Though compatible with all the existing Raspberry Pi models, the hole line up for installation is good enough only for Raspberry A+, Raspberry B+, Raspberry Pi2

Next on our list is a screen by Kuman, one of the top manufacturer’s in the realm of hobby electronics. This one too is a 7 inches large TFT capacitative touch screen.

Yet another Kuman 7 inches HD Display Screen, this one is quite different from the previous Kuman display screen. That difference is not just in the screen resolution but in a wide range of other things as well.

Next on our list is 1 large 10.1 inches LED Display. The Elecrow HDMI supported LED display monitor supports all the old and new Raspberry Pi models like the Pi 4, 3, 2, and B, B+ models as well.

Apart from Raspberry Pi models, it is also compatible with PS3, PS4, WiiU and XBOX360 and can also be used for video, for car headrest and as a small display for medical equipment too

In this entry, SunFounder comes with a 10.1 inches large HDMI supported IPS LCD display monitor. It has a high resolution of 1280 X 800 pixels and also comes with a camera holder stand.

Next on our list is another SunFounder Raspberry Pi Compatible screen. This one is a simple 7 inches large LCD Display screen with built-in speakers too.

Next product on our list is from a brand called ELECROW. Their LCD screen comes with 5-inches size display and high-resolution picture. It is a resistive touchscreen monitor and comes with a touch pen for easy use.

This LCD touch screen is from SunFounder which has similar dimensions and aesthetical aspect as the previous 10.1 inches Screen by SunFounder and are essentially the same. This is just an older model of the same product.

The last but not least product from our list is a 7-inch LDC touch screen for Raspberry Pi. It supports mini PC like Raspberry 1B+ / 2B / 3B / 3A+/ 3B+/ 4B.

But it’s up to you to take the correct decisions as per your requirement. To make it happen, you must acquire some knowledge in technology stuff which becomes very easy for you to pick the right one.

Given below are some of the factors that most of the people ask for while purchasing the Raspberry Pi display kits. Get to know about them in detail to make a good choice.

So when you make a purchase, check whether the device is within your budget or not. If it so, then you can happily add the item to cart and wish for it.

But the problem arises when you are unable to afford the money or willing to use the item to fulfill your basic needs. For them, we provided the raspberry pi display kits that come with amazing features at very low prices. Read the product information to know which product best suits your requirements.

Display resolution or the modes is the number of distinct pixels in each dimension that can be displayed. It is controlled by many of the factors like CRT, flat-panel displays, and LCDs. If the resolution you opt is not compatible then the monitors will stretch and shrink to fit in the specified. It turns result in a great loss of the signal and quality.

Like regular displays, the raspberry pi displays make effective communication between the peripheral devices. For this, it makes use of the connectors. The most common connectors are HDMI, VGA & AV-input. Each of them is illustrated below.

In this section, we are going to show you exactly how you can connect your Raspberry Pi to an external display screen. First, let us look at how to connect it using an HDMI port

Using the HDMI port to connect a Raspberry Pi to the LCD screen is one of the simplest and easiest ways to go. Here, all you need to do is to take an HDMI cable and plug it on both sides of the devices. One end goes into the HDMI port of the LCD screen and the other one will go right into the Raspberry Pi’s HDMI port. This set up does not require any special drivers software nor does it require any format of post plugin set up.

Raspberry Pi comes with a tiny 15 pin ribbon cable connector that can support a Display Serial Interface or a DSI standard. This enables fast communication between an LCD screen and the chip.

You can use the Raspberry Pi 7 inch touchscreen display by connecting it with the Raspberry Pi board. All you need to do is to first attach the raspberry pi to the back of the display screen using standoffs and screws that come with the kit.

Now connect the Pi board to the ribbon cable and the display control board. Note the ribbon cable pin orientation is proper or not. After this, carefully release the tabs on both sides of the socket so that the cable slides all way. Now secure this by pressing down on the tabs till you hear a click of a lock. Make sure you are not forcing the cable to lock.

If not, you can simply connect a power supply to the control board and then connect a small micro USB cable in the control board’s USB port and the micro USB port of the Pi. This should power on the device. You are now done setting up the device and the screen and once the power flows, the device boots up.

If the screen does not automatically turn on when the power source is connected, you may have to connect an existing HDMI display for updating your Raspberry Pi board and then reboot the device.

The Raspberry Pi 7″ Touch Screen Display from the house of Raspberry has a great colour output of 800 x 400 pixels and its capacitive touch is multi-fingered up to 10 fingers. That and the fact that it is specifically built for Raspberry pi Boards by the Raspberry company makes it the best Raspberry Pi LCD screen for your DIY Raspberry pi kit.

While those were our picks, we are intrigued by your choices, thoughts and opinions. Did we miss out on anything? Or do you want us to add anything else to this list? If so or if you have any questions for us or about the products mentioned, feel free to write to us in the comments section below. Our product expert team will write back to you as soon as possible.